We are working on using [https://www.irods.org iRODS], as a way to increase storage for users of the HUB. Possible uses include simple staging of data for simulation, and housing searchable collections of documents. Some theory about our approach can be found in the paper [http://hpc2.org/resources/39 here]. We were using two servers to test iRods at CCR. The first was both a data and metadata server. The second was just a data server. Now, we upgraded to iRODS 3.0 and are only using one server. == Setup for New User == Ask the administrator to create an irods account for you with a password you'd like. To create the necessary files for irods to run, download the [[File(irods_newuser.sh)]] bash script and execute it in a terminal. To use the default user ''annonymous'' and only be able to read the ''public'' directory on irods, you can just run the script as follows: {{{ > chmod +x irods_newuser.sh > ./irods_newuser.sh Do you want to make 'use irods' persistent? (y/n) y }}} If you want to change the settings to use a different username, zone, etc, append the ''-i'' argument to the end of the name of the script. Here is a example of changing the username to ''vhub''. {{{ > chmod +x irods_newuser.sh > ./irods_newuser.sh -i Answer the following questions to configure iRODS Press ENTER for the default setting for each question iRODS server name [irods.ccr.buffalo.edu]: iRODS port [1247]: iRODS username [anonymous]: vhub iRODS zone [vhub]: iRODS resource name [vhub-ccr-buffalo]: iRODS home dir [/vhub/home/vhub]: iRODS current working dir [/vhub/home/vhub]: Do you want to make 'use irods' persistent? (y/n) y Enter your current iRODS password: > }}} After the script has run, you will be able to use the [https://www.irods.org/index.php/icommands i-commands] and use files mounted in your irods directory in the'' ~/irods'' directory on your hub environment. To see if everything is working correctly you can type '''ils''' or '''ls ~/irods''' and you should see the files that are currently in your home directory in irods. ---- If you would just like to download the ''irodsEnv'' file and modify it yourself, you can download it below. (The file below is already configured to run as the ''annonymous'' user and read the ''public'' directory). File: [[File(irodsEnv)]] If you decided to just download the ''irodsEnv'' file, then you need to follow the following 7 steps. If you ran the ''irods_newuser.sh'' script, then you can skip these 7 steps. 1. Modify the user name inside the file linked above, and change the file name to ''.irodsEnv'' 2. Create a folder name ''.irods'' in the user's home directory and place ''.irodsEnv'' in the folder. 3. Create a folder named ''irods'' in your home directory. This folder will be used as the mount location for the the iRODS filesystem. 4. Type the command '''use irods''' in your workspace command line to be able to run icommands. 5. Create a bash profile file name ''.bash_profile'' with the following content: {{{ if [ -n $IRODS_MOUNT -a -e $IRODS_MOUNT ]; then $IRODS_MOUNT fi }}} 6. To make your password persist, type '''iinit''' and enter your irods password. 7. Then, run the command '''source .bash_profile''' After these steps you should be able to use the [https://www.irods.org/index.php/icommands i-commands] and use files in your ''~/irods'' directory. == .bashrc files for users == Once icommands and irodsFs are installed into ''/apps'' the script will read similar to this: {{{ PATH=/apps/iRODS/clients/icommands/bin:/apps/iRODS/clients/fuse/bin:$PATH irodsFs $HOME/irods 1>/dev/null 2>&1 }}} == submit and irods == Make sure ''preprocess_irods.sh'' and ''postprocess_irods.sh'' are set to '''executable''' {{{ chmod +x preprocess_irods.sh chmod +x postprocess_irods.sh }}} Also when using the ''submit'' command, be sure to include the ''preprocess_irods.sh'' and ''postprocess_irods.sh'' files {{{ submit ... -i preprocess_irods.sh -i postprocess_irods.sh ... }}} If you are placing the output of a job into iRods, make sure to use the '''-q''' option with submit so that there will be no limit on the file size that you can create. === modification to /san/user/vhub/u2/bin/receiveinput.sh === {{{ IRODS_INPUT_NAME="preprocess_irods.sh" if [ -x ./$IRODS_INPUT_NAME ]; then ./$IRODS_INPUT_NAME fi }}} === modification to /san/user/vhub/u2/bin/transmitresults.sh === {{{ IRODS_OUTPUT_NAME="postprocess_irods.sh" if [ -x ./$IRODS_OUTPUT_NAME ]; then ./$IRODS_OUTPUT_NAME fi }}} == Common Problems == === Client cannot connect to server === Server may go down unexpectedly. Admin should log onto ''irods1.ccr.buffalo.edu'', change to the iRods directory and type ''irodsctl'' restart It's better to use restart than istart because sometimes the SQL server has gone down but the iRODS daemon is still running. istart will not resart the database. Check the server log to see whether the restart succeded. The log is in iRODS/server/log and it is named by the date, e.g. rodsLog.2010.7.11 === vhub cannot access the users file === The user must do the command ''ichmod'' inherit username ''ichmod'' -r own vhub /vhub/home/username == Idea for submitted apps to get irods files == Use file browser to get path to file. * Parse path to get file name. * when submit arrives, it makes a symbolic link to the file name and name the link with the file name. * remove the symbolic link after the app runs. {{{ ln -s irods/username/pathToFile/filename filename }}} * submit execs app, file "resides" in cwd. {{{ rm filename }}} == To use a remote command-line client: == Get a copy of the file .irodsEnv from us ('''Note''': the irodsHost needs to be an '''''IP address''''' rather than a domain name) and have us set up your '''login name''' and '''password''' on the iRods server. From your home directory on the hub: {{{ mkdir ~/.irods mv .irodsEnv ~/.irods }}} [https://www.irods.org/index.php/Downloads Download iRods] Follow these [https://www.irods.org/index.php/Installation instructions] for '''installing additional clients'''. At this point you will need to set your path: {{{ PATH=home/vhub/username/iRODS/clients/icommands/bin:$PATH }}} It's easiest if you put this command in your ''.bashrc'' or ''.profile'' file so the commands are available every time you open a terminal. == Some basic concepts == * '''collection''': a directory * '''resource''': represents a physical data server location that can hold many collections * '''zone''': multiple resources can be members of the same zone == Some useful commands == * '''iinit''': enter your password and it will get cahed so you don't have to give your password for every command. * '''ils''': list files * '''imkdir''': create a directory (also called a collection) ''imkdir'' username/folder * '''iput''': put a file into iRods ''iput'' foo.tar username/folder * '''ireg''': copy a directory revursively into iRods '''NOTE''': If you add files to the actual physical directory, this is not reflected in iRODS. {{{ ireg -C /data/iRODS/testIreg/ /tempZone/home/rods/newCol ils newCol /tempZone/home/rods/newCol: foo1 foo2 cd testIreg/ touch bar ils newCol /tempZone/home/rods/newCol: foo1 foo2 }}} You can place files inside the iRods directory structure on the sever and the register them later {{{ mv foo.txt /data/iRODS/iRODS/Vault/home/public ireg -R vhub-ccr-buffalo /data/iRODS/iRODS/Vault/home/public/foo.txt /vhub/home/public/foo.txt }}} == iRods FUSE notes == Install: Need to install ''libfuse-dev'' to get the header files in the same path as the library edit `iRODS/config/config.mk` {{{ uncomment IRODS_FS = 1 }}} set ''fuseHomeDir=path/to/fuse'' where the path is just above ''include/fuse.h'' and ''lib/libfuse.a'' on your vhub account this is simply ''fuseHomeDir=/usr'' in iRODS/client/fuse do '''make''' Add another path so that you can mount with the command ''irodsFs'' '''NOTE: You cannot unmount on your vhub account, once you've mounted irods. Only a vhub dministrator can run fusermount.''' {{{ PATH=/home/alisanee/iRods/iRODS/clients/icommands/bin:/home/alisanee/iRods/iRODS/clients/fuse/bin:$PATH }}} == Public share directory == While using iRODS you may want to share files with different users. One way to do this is to put the files you want to share in ''/vhub/home/public''. Any user that is on the iRODS system can read and write to this public directory. ''icp'' foo /vhub/home/public '''ADMIN NOTE:''' When users are created, they are automatically added to the ''share'' group. The permissions on the ''/vhub/home/public'' directory is set up so anyone in the ''share'' group is allowed r/w access. If you want to allow users that do not have an account on the iRODS system to access the public share directory, you need to create the ''anonymous'' user. Create the user just like all the other users, but you do not have to set the password. ''iadmin'' mkuser anonymous rodsuser After creating the user, allow that user to ''read'' the ''/vhub/home/public'' directory. ''ichmod'' read anonymous /vhub/home/public ''ichmod'' inherit anonymous After these steps, anyone that does not have an account on the irods system is able to read the files located in the ''/vhub/home/public'' directory. They are not able to write or go up the directory structure. In order for users to login to iRODS with this ''anonymous'' user, all you have to do is use the username ''anonymous'' with any password. The username ''anonymous'' is a special account name that is recognised in the iRODS system. Admin's can use the following script to automate the process of creating the necessary files needed to use the ''anonymous'' user in vhub and mount the ''/vhub/home/public'' directory on iRODS to ''~/irods'' directory on the users filesystem on vhub. File : [[File(irods_anonymous.sh)]] == Administrators' To Do List For Installing on HUB == put the icommands in the path for every user install .irods directory for every user and provide an irodsEnv file with their Hub ID as the user name do iinit once with their user name and password. This will create a file, .irods/.irodsA which holds the user's encrypted password, so that they won't have to enter their password to do an icoomand. in irods, create a home directory for the user and set the group to the user name. irodsFs mount in an empty folder named irods '''irodsFs irods''' ===For New User=== As the 'rods' administrator, for a new hub user: '''iadmin mkuser username#vhub rodsuser''' ''create new user (use rodsadmin if they are an admin)'' '''iadmin moduser username password somepassword ''' ''set user's password'' ~~'''imkdir username''' ''make home directory for new user''~~ ~~'''ichmod -V own username username''' ''let user rwx her home directory''~~ '''ichmod read vhub /home/username''' ''let vhub rwx user's home directory'' '''ichmod write vhub /home/username''' '''ichmod inherit username''' ''let vhub rwx the subdirectories and files the user creates'' '''NOTE:''' if you are creating a ''rodsadmin'' account, then you must use the '''-M''' option with ichmod users can then do ''iput'' ''iput'' foo username Note that the ''irods1.ccr.buffalo.edu'' name is not available to a DNS server, so until that changes, the irodsEnv has to be edited to have the IP address instead. Edit `.bashrc` in iRods server(done): {{{ PATH=/data/iRODS/iRODS/clients/icommands/bin:$PATH }}} Install iRods on vhub@u2-grid (done) edit `.bashrc` {{{ PATH=/san/user/vhub/u2/iRODS/clients/icommands/bin:$PATH }}} ''iadmin'' mkuser username rodsuser ''iadmin'' mkuser vhub rodsadmin ===Transferring large files=== When you send or receive a file to/from iRODS that's over 32 MB, it starts opening multiple ports so it can multithread the data transfers. You need to make sure the correct ports are open or the data transfer will not work. Open ports ''20,000'' to ''20,199'' in the firewall For irods@irods1.ccr.buffalo.edu edit `~/iRODS/config/irods.config` to say {{{ $SVR_PORT_RANGE_START = '20000'; $SVR_PORT_RANGE_END = '20199'; }}} and also `~/iRODS/scripts/perl/irodsctl.pl` to say {{{ $svrPortRangeStart=20000; $svrPortRangeEnd=20199; }}} Then restart the server ''irodsctl'' restart '''Note:''' when doing the multithreaded data transfers we had a problem with the server only listening on the internal IP address. {{{ > iput -V -f test_dir_timing_40mb_80files.tar kmarcus/test_time NOTICE: irodsHost=irods1.ccr.buffalo.edu NOTICE: irodsPort=1247 NOTICE: irodsDefResource=demoResc NOTICE: irodsHome=/vhub/home NOTICE: irodsCwd=/vhub/home NOTICE: irodsUserName=kmarcus NOTICE: irodsZone=vhub >From server: NumThreads=2, addr:10.6.1.20, port:20169, cookie=810769104 ERROR: connectToRhostPortal: connectTo Rhost 10.6.1.20 port 20169 error, status = -347000 }}} '''Fix:''' edit `~/iRODS/server/config/irodsHost` to say: {{{ localhost irods1.ccr.buffalo.edu 10.6.1.20 }}} This tells iRODS to prefer the interface ''irods1.ccr.buffalo.edu'' when binding. Information for this fix was provided by Chris Smith on [http://groups.google.com/group/irod-chat/browse_thread/thread/24ade1a0b1954d42/a39ad7965695e5d1?lnk=gst&q=kmarcus30#a39ad7965695e5d1 iRODS Chat] ==Uninstalling iRODS server== remove the collections (i.e. directories and files), e.g. '''irm -r aneeman''' turn irods off '''irodsctl stop''' remove directories for irods and its postgres installation. ==Changing the server== ===Rename resource=== {{{ iadmin modresc oldName name newName }}} edit config/irods.config {{{ $RESOURCE_NAME = 'newName'; }}} restart the server {{{ ./irodsctl restart }}} ===Change hostname=== stop the server {{{ ./irodsctl stop }}} Edit the following files, changing the host name to the new address: * `.odbc.ini` in the home directory * `.irods/.irodsEnv` in home directory * `pgsql/etc/odbc.ini` in the Postgres directory * `server/config/server.config` in iRODS distribution directory Edit server/config/irodsHost {{{ localhost new-host-name 10.122.1.8 }}} Start iRods again {{{ ./irodsctl start }}} Finally, modify the address of the local resource {{{ iadmin modresc demoResc host new-host-name }}} == Move a collection or file to a specific server == '''iphymv -r resource2Collection -R demoResc2''' ''-r'' recursive ''-R'' resource name The "mount" always looks the same, regardless of the physical location. You can move a file to any data server. ==iRods Timing== [[Image(irods_timing.png)]] ==Creating iRods Rules== Documentation on iRods rules can be found [https://www.irods.org/index.php/Rules here] iRods 3.0 has added [https://www.irods.org/index.php/Changes_and_Improvements_to_the_Rule_Language_and_the_Rule_Engine new rule syntax] '''Example iRods Rule setup''' For the example rule, we have a directory on irods (''/irods/home/public'') where the 'anonymous' user is able to download files. For the files in this public directory we also want to serve them on a web page. One way we came up with to do this was to add the 'apache' user to the 'irods' group and change all the permissions on the files in the ''public'' directory so that the group permissions were readable (this way the apache server running as 'apache' could read the files, but the 'irods' user could still do anything it need to do with the files). In order to do this I came up with the following rule which is located at ''server/config/reConfigs/publicGroupPermissions.re''. This rule uses the 'on' keyword as its main logic. When the $objPath (variable that is defined by the irods session) is in the ''public'' directory, it will then call a shell script to change the permissions on all the files in that ''public'' directory. Writing to the log file with msiWriteRodsLog is not necessary, but it is useful for debugging purposes. {{{ publicGroupPermissions { on ($objPath like "/vhub/home/public/*") { msiExecCmd("publicPermissions","null","null","null","null",*Result); msiWriteRodsLog("--- INSIDE publicGroupPermissions ---",*Status); } } }}} this rule will call the publicPermission script (''server/bin/cmd''), its permissions set to execute. This script will change the group permissions for all the files in the public directory. Here is the ''server/bin/cmd/publicPermissions'' shell script: {{{ #!/bin/sh chmod g+r /data/iRODS/iRODS/Vault/home/public/* }}} Then add the publicGroupPermissions rule file to the ''server/config/server.config'' file (this is where all the rule files that are going to be used are defined, they are comma seperated). {{{ -- reRuleSet core ++ reRuleSet core,publicGroupPermissions }}} Finally, you must specify when the rule should be called. In this case we wanted the rule to be called when someone put a file into the iRods ''public'' directory. To do this, you would use the ''iput'' command to add file. To execute the publicGroupPermissions rule when the ''iput'' command is used, the rule must be added to the ''server/config/reConfigs/core.re'' file. The place where we want to add our rule is ''acPostProcForPut'', this is the function that gets executed after ''iput'' has succeeded. {{{ -- acPostProcForPut { } ++ acPostProcForPut { publicGroupPermissions; } }}} After all of this is in place and all the permissions on the files are properly set, restart the server. {{{ ./irodsctl restart }}} To test this rule, start placing file in the ''public'' directory and then look at the permissions in ''Vault/home/public'', you should now see that all the files are now readable by the irods group. '''Useful notes''' * rules ending in ''.re'' are 3.0 syntax * rules must be located in: ''server/config/reConfigs/'' * scripts called from rules must be located at: ''server/bin/cmd/'' * rule config file: ''server/config/server.config'' * rules must be comma seperated * example rules: ''clients/icommands/test/rules3.0/'' * iRods 3.0 api [https://irods.org/doxygen/index.html documentation] * watch log files for debugging * iRods: {{{tail -f server/log/rodsLog.YYYY.MM.DD}}} * rules engine: {{{tail -f server/log/reLog.YYYY.MM.DD}}} * The users home directory on irods: ''Vault/home/'' * Session variables listed in ''server/config/reConfigs/core.dvm'', more info in iRods Primer book ==Useful links for admins/developers== [https://www.irods.org/index.php/Publications iRods Publications] [http://www.morganclaypool.com/doi/abs/10.2200/S00233ED1V01Y200912ICR012?journalCode=icr iRODS Primer: Integrated Rule-Oriented Data System] Morgan & Claypool, 2010 (PDF) [https://irods.org/doxygen/index.html iRods 3.0 api] [https://www.irods.org/web/index.php iRods web client] ==Current iRods config== '''server''': irods.ccr.buffalo.edu '''port''': 1247 '''zone''': vhub '''resource''': vhub-ccr-buffalo